Name:Rubber DIN Abrasion Tester
Model:KL-DIN
Description:DIN, abrasion tester. Compared with common brands tester of Akron and Grasselli, it has many advantages, such as small required specimen, short period of test, abrasive stroke repeatable and etc. The tester conforms to the requirements of GB9867, ISO4649 and DIN53516.
Rubber DIN Abrasion Tester Detailed information:
DIN, abrasion tester. Compared with common brands tester of Akron and Grasselli,
it has many advantages, such as small required specimen, short period of test,
abrasive stroke repeatable and etc. The tester conforms to the requirements of GB9867,
ISO4649 and DIN53516.
Features:
Accurate setting of the abrasion stroke by Delta digital counter;
Very easy to operate the moving system, even by one finger;
Keep safety system without crashing by electric sensor;
Use shield to protect the screw pole clean and lubricated rotating,
Very simple transformation between static test and rotary test.
Default Configures:
Main unit 1pc
Located plate for sample settle 1pc
Mold for samples 1pc
Knife for samples 1p
Specifications:
Specimen size: diameter 16mm, height 6-16 mm |
Load: 2.5N,5N,10N |
Rotating wheel: diameter 150mm, length 460mm, rotating speed 40rpm |
Accessories: Sand paper,standard glue,sample cutter.
|
Abrasion paper: 60# |
Weight: 45kg |
Remove range: 4.2mm/R.P.M. |
Power: 1Ø, AC 220V, 50 ~60Hz 3A
|
Speed: 19.2m/minute |
Dimention: 85×32×40cm
|
If you are interested in Rubber DIN Abrasion Tester, want to know more detailed product information, fill in the table below the direct contact with the manufacturers: |
Related products: |